12
potentiometer is in the bottom AUTO area, then the chase pause time and
chase cross time that had already been edited will be run.
4. Press [CROSS MODE], to change the running mode; see 9.explanation of the
duplex key area for details.
5. If you want to carry out the mixed running program of manual and automatic,
you can set the running according to the following steps.
a). First, release the channel: Press [CHANNELS], and then press (P1-P8) (or
press [SHIFT], and then press PCH9-PCH16), to release the corresponding
channel, and F will be changed to O; at last, press [CHANNELS], to
memorize it and quit. (F: indicates that the corresponding channel will not
take manual data in chase running, and is controlled by a programmed chase.
O: indicates the corresponding channel is not controlled by the chase in chase
running, and it will take manual slider data).
b). Select the scanner that will run the release channel: Press [MANUAL],
and then press (P1-P12), to select the scanner light to be manually controlled.
Randomly push the corresponding released potentiometer slider to carry out
mixed running program of manual + automatic, then press [MANUAL] to
quit the manual option.
6. Press [BLACK] can make pause/start selections for the running chase; when
LED corresponding to the key is on, then output is paused, and when the
LED is off, then the output is run normally.
13
．
．
．
．
Special scene presentation
In the state of running chase (i.e., the indicating light corresponding to
[RUN/EDIT] is off), press [RUN SCENE], and then press any key of P1-P12, will
call out the first 12 scenes in the programmed No. 1 chase. Therefore, we suggest
that in that in program state, the first 12 scenes in No. 1 chase should be specially
defined, which can make some special effects.
