10
or CROSS
[***]
EDIT Chase [??]
STEP [01] [**]
Press[EDIT/RUN], to have the corresponding indicating light on,
indicating the console is in the edit state.
The ?? in Chase[??] represents edited chase number to be run.
STEP [01] is the serial number of the chase step, which can change
with the operation of
［ －］
or
［＋
］
When the final [ ] shows**
in it, it indicates that chase step is the last step in this chase.
1 2 3 4 5 6 7 8
F F F F F F F F A
or F F F F F F F F B
Press [CHANNELS] to show the left interface. The bottom line
number indicates the state of the 8 corresponding basic control
channels (Channels 1 to 8 are identified with the suffix A, and
channels 9 to 16 are identified with the suffix B), and the bottom line
F or O respectively indicates whether the channel of the
corresponding row is automatic or manual, i.e., whether it is released.
Here, F indicates unreleased, which can be changed by pressing the
corresponding P1 to P8, or pressing [SHIFT]
＋（
PCH9-PCH16
）
.
Set: X-Y
X: [ ] Y: [ ]
When just entering the editing state, press [SET X/Y] will show the
prompt on the left.
X: [ ] Y: In the space, the channel number to be transferred to the
rocker control can be input by pressing P1-P8 or pressing [SHIFT]
＋（
PCH9-PCH16
）
, and you can also press [DELETE], to cancel the
set transfer channel.
MANUAL: [??]
F F F F F F F F A
or F F F F F F F F B
In the state of running the chase, pressing[MANUAL], will show the
prompt on the left.
The[??] in the upper line shows the chase number that is running, and
the bottom line shows whether the 1-16 channels (channels 1-8 are
identified with suffix A, and channel 9-16 are identified with suffix
B) are released. Here, F indicates the corresponding channel is
released, and O indicates it has not been released. Press P1-P12 again
with select one or more scanners to conduct the manual operation of
the released channels.
Press [MANUAL] again, will quit the mixed control of manual
＋
automatic, and then carry out the automatic program.
11. The editing of scanner chase
1. Press [BLACK], to turn on the LED;
2. Press [EDLT/RUN], to turn on the LED, and enter the program state;
3. Press any one of the number keys (P1-P12) once, to select the chase number
