3
GB
Instruction Manual
HE14254_A © 09/2014
MAPAX2L2
3. Description of the battery operated electro-hydraulic expanding and sliding tool
3.1 Description of the components
The hydraulic tool is a hand guided tool and consists of the following components:
Table 2 (see page I, picture 1)
Pos.
Description
Function
1
Sliding head
Working unit for the reception of the sliding forks and expanding adapter
2
Housing
Ergonomically designed 2K-housing
3
Retract slide
Bar to open the sliding forks in case of an error or emergency
4
LED (red)
Indicator for battery charge, service Intervals and faults
5
battery lock
Slide to unlock the battery
6
Battery (RAL1/BL1815)
Rechargeable Li-Ion battery 18V
7
LED (white)
to illuminate the working area
8
Trigger
Actuator to start the sliding cycle
Optional:
9
Expanding adapter AWASS For the admission of the sliding heads AWKS...
10
Fitting fork
For the admission of the
fi
ttings
11
Sleeve fork
For the admission of the sleeve and the tube
12
Expanding head AWKS
To expanding the tubes
3.2 Brief description of the important features of the unit
Hydraulic Pressure Check, HPC for short, monitors the oil pressure in the tool’s oil circuit, hence ensuring a continu-
ous, consistent press quality.
The tool incorporates a catcher to
fi
x the sliding forks (page V, pic. 17 and 18).
Availability of a wide range of sliding forks.
The unit is equipped with a special brake which instantly stops the forward motion of the piston/dies when the trigger
is released.
