Instruction
manual
HK
5
page
29
___________________________________________________________________________
Afterwards the crimping head (Pos.-No. 2) have to be opened and the dies will be inserted
consequtively into the opened crimping head. Then the connecting material must be positioned
in the crimping head and the crimping head must be closed again.
The crimping process will proceeds as described in chapter 4.3.
After the crimping process has been finished the latch (Pos.-No. 1) has to be opened again and
the connecting material has to be removed.
5.2. Explanation of the application range
Our hydraulic crimping tool type HK 5 has a large number of various dies (Pos.-No. 7)
available to crimp primarily copper and aluminium but also other connecting material.
Table 2
Crimping range
Connecting material
_________________________________________________________________________________________________________________
a
6-240
mm² Tubular cable lugs and connectors „Standard type“
_________________________________________________________________________________________________________
b
6-185
mm² Compression cable lugs and joints DIN 46235/DIN 46267
_________________________________________________________________________________________________________________
c
10-150
mm² Aluminium cable lugs and connectors
_________________________________________________________________________________________________________
d
25-95
mm² Compression joints for full-tension connections for Aldrey
conductors acc. to DIN 48201, sheet 6
Instruction
manual
HK
5
page
29
___________________________________________________________________________
Afterwards the crimping head (Pos.-No. 2) have to be opened and the dies will be inserted
consequtively into the opened crimping head. Then the connecting material must be positioned
in the crimping head and the crimping head must be closed again.
The crimping process will proceeds as described in chapter 4.3.
After the crimping process has been finished the latch (Pos.-No. 1) has to be opened again and
the connecting material has to be removed.
5.2. Explanation of the application range
Our hydraulic crimping tool type HK 5 has a large number of various dies (Pos.-No. 7)
available to crimp primarily copper and aluminium but also other connecting material.
Table 2
Crimping range
Connecting material
_________________________________________________________________________________________________________________
a
6-240
mm² Tubular cable lugs and connectors „Standard type“
_________________________________________________________________________________________________________
b
6-185
mm² Compression cable lugs and joints DIN 46235/DIN 46267
_________________________________________________________________________________________________________________
c
10-150
mm² Aluminium cable lugs and connectors
_________________________________________________________________________________________________________
d
25-95
mm² Compression joints for full-tension connections for Aldrey
conductors acc. to DIN 48201, sheet 6
