Instruction
manual
HK
4
page
23
___________________________________________________________________________
5. Remarks in respect of the determined use
Before starting any work on electrical appliances it must be safeguarded that there are no
live parts in the immediate assembly area of the user. Is this not possible special precaution
measures acc. To EN 50110-1 for working near live parts must be provided.
5.1. Operation of the unit
First you have to select the right dies (Pos.-No 7) for the intended application.
The crimping head has to be opened by unhooking the latch (Pos.-No. 1).
Afterwards the crimping head (Pos.-No. 2) have to be opened and the dies will be inserted
consequtively into the opened crimping head. Then the connecting material must be
positioned in the crimping head and the crimping head must be closed again.
The crimping process will proceeds as described in chapter 4.3.
After the crimping process has been finished the latch (Pos.-No. 1) has to be opened again
and the connecting material has to be removed.
Instruction
manual
HK
4
page
23
___________________________________________________________________________
5. Remarks in respect of the determined use
Before starting any work on electrical appliances it must be safeguarded that there are no
live parts in the immediate assembly area of the user. Is this not possible special precaution
measures acc. To EN 50110-1 for working near live parts must be provided.
5.1. Operation of the unit
First you have to select the right dies (Pos.-No 7) for the intended application.
The crimping head has to be opened by unhooking the latch (Pos.-No. 1).
Afterwards the crimping head (Pos.-No. 2) have to be opened and the dies will be inserted
consequtively into the opened crimping head. Then the connecting material must be
positioned in the crimping head and the crimping head must be closed again.
The crimping process will proceeds as described in chapter 4.3.
After the crimping process has been finished the latch (Pos.-No. 1) has to be opened again
and the connecting material has to be removed.
