Instruction
Manual
ESG
85
Plus
page
15
_____________________________________________________________________________
The charging of the batteries must only be done with charging units supplied by the
manufacturer.
Attention
Do not place the battery in your pocket or in your toolbox if there are any
conductive materials in it such as coins, keys, tools or other metallic parts.
Pull the plug of the charging unit after charging. Do not disassemble the charging unit or
battery.
In order to safeguard a safe and proper performance of the charging unit the repair and
service of the unit should be made through our Service Center.
5.5. Storage and transport of the cutting tool
In order to protect the tool against damages it has to be cleaned carefully after every use
and put into the transportation case.
Into the case you can put a spare battery cartridge, the charging unit and the instruction
manual.
6. Troubleshooting
a.) Flashing of the light diode display (Pos.-No. 6)
=>
See chapter 4.3 for more information about the special functions of the tool.
b.) The tool loses oil.
=>
Return the tool to the manufacturer. Do not open the tool and damage the seals of
the
tool.
c.) The cutting tool does not reach the final operating pressure.
=>
Stop the cutting process. Press the retract button (Pos.-No. 2) and the trigger
(Pos.-No. 1) simultaneously and continuously for about 10 sec. Is the malfunction not be
eliminated by this attempt the tool has to be returned to the manufacturer.
7. Putting out of operation/waste disposal
After extensive use even a high-quality tool has finally to be put out of operation.
The disposal of the various components of the tool have to be treated separately. Doing that
the first step is to dispose of the oil at special delivery points.
Attention
Hydraulic oils present a danger for the ground-water. Uncontrolled draining
of or improper disposal is under penalty. (environmental liability law)
Next, the battery cartridge has to be specially disposed.
To dispose of the remaining parts of the unit please consult your national environmental
laws.
