27
EN
Switch on purified water mode:
•
Press the “Purified Water“ button to start the purified
water mode, the display will light up.
• The default setting for the keep warm temperature is
45 °C. This allows you to keep the water warm at the
pre-set temperature without boiling the water to 100 °C.
7. No Water Check
• When the “No water“ indicator
lights up, it indicates that
water should be filled and that the appliance is terminating
the heating mode.
•
Prevent dry burning without water! When you have filled up
enough water, the heating mode will automatically start.
CLEANING AND MAINTENANCE
Clean the housing
• Wipe the body with a dry soft cloth. Never use a wet cloth for cleaning.
• To remove heavy dirt, wipe the appliance with a cloth wrung tightly.
• To avoid deformation or cracking, do not use benzine, thinner or liquid cleaners.
• Chemical products can damage the exterior of the appliance.
• Do not clean the hot water dispenser in the dishwasher.
Clean inner pot (water tank)
• Wipe the inner pot with a sponge.
• Do not use cleaning agents, stainless steel brushes or nylon brushes.
• The deposit of minerals in the water leads to limescale deposits on the surface of
the inner pot, which are not harmful to health. Once every 2-3 months, remove
limescale from the inner pot. For example, use citric acid, which is available in retail
stores (drugstore or supermarket). Follow exactly the instructions on the packaging
or the enclosed operating instructions for citric acid.
