Klarstein 10028189, Manual

Page: 33 / 84

33
EN
The remote control
does not work.
The distance between the
machine and the remote
control is too far.
Let the remote control
get close to the air
conditioning, and make
sure that the remote
control directly faces to
the direction of the remote
control receiver.
The remote control is not
aligned with the direction of
the remote control receiver.
Batteries are dead. Replace batteries.
Displays ‚E1‘. The pipe temperature
sensor is abnormal.
Check the pipe
temperature sensor and
related circuitry.
Displays ‚E2‘ The room temperature
sensor is abnormal.
Check the room
temperature sensor and
related circuitry.
Protection Functions
Frost Protection Function:
In cooling, dehumidification or economic power saving mode, if the temperature
of the exhaust pipe is too low, the machine will automatically enter protection
status; if the temperature of the exhaust pipe rises to a certain temperature, it can
automatically revert to normal operation.
Overflow Protection Function:
When water in the water pan exceeds the warning level, the machine will
automatically sound an alarm, and the LDC temperature display area will show
„FL“. At this point, you need to move the drainage pipe connecting the machine or
the water outlet to sewer or other drainage area to empty the water (details see
Drainage Instructions at the end of this chapter). After the water is emptied, the
machine will automatically return to the original state.
Protection Function of the Compressor:
To increase the service life of the compressor, it has a 3-minute delay booting
protection function after the compressor is turned off.