6
Dear Customer,
Congratulations on purchasing this Klarstein eqipment. Please read this manual carefully and take
care of the following hints on installation and use to avoid technical damages. Any failure caused by
ignoring the mentioned items and cautions mentioned in the operation and installation instructions
are not covered by our warranty and any liability.
Contents
Technical Data 6
Safety Instructions 6
Ventilation Instructions 6
Product Description and Display 7
Temperature Control 7
Getting Started 8
Troubleshooting 8
Electric Diagram 9
Environment Concerns 9
Declaration of Conformity 9
Technical Data
Item number
10027674
Capacity
43 liters
Power supply
220-240 V ~50-60 Hz
Rated power
65 W
Dimension (W x D x H)
345 mm x 508 mm x 645 mm
Weight
17.9 kg
Safety Instructions
• Position your wine cooler so that the plug is accessible.
• Keep your wine cooler out of direct sunlight.
• Do not place next to heat generating appliance.
• Do not place directly on the ground. Provide suitable stand.
• The wine cooler must be connected to a properly earthed socket in line with relevant valid country
regulations before operating.
• Check the data label (which is on the side of the wine cooler) for voltage and frequency corres-
ponds to your local one; If not, don‘t plug your cable into the socket.
Ventilation Instructions
When putting a TE wine cooler, ventilation should be considered seriously, please refer to the fol-
lowing:
• There should be left at least 200 cm³ for ventilation
• The distance between wall and wine cooler side should be at least 20mm
•
The bottom should be left at least 50mm for air flowing
• Air passing through must not be preheated
• Entire cooling system should be considered in the ventilation
