Technical data
Power: 230V AC/50Hz
Dimension (L/W/H mm): 565×290×440
Beer keg: Standard 5 liter party keg
Contents, accessories and technical data subject to changes without prior notice!
List of parts
1. lid
2. dispensing unit handle
3. gas outlet valve
4. tap handle
5. Pump regulator
6. main switch
7. LED
temperature indicator
8. drip tray cover
9. drip tray
10. front tube cover
11. coolingchamber
12. lid opener
13. keg tap
14. power cord
15. switch
16. beer keg stoppers
17. connecting tube
18. tools for removing keg stopper
19. adapter
Warning:
Before fi tting or removing related parts, please cut off the mains socket, remove the plug from
the socket.
Operating instructions
1. Remove the beer dispenser from the packaging.
2. Place the beer dispenser on a stable, horizontal, level and non-slip surface. Ensure that there is at
least 10cm of space around the dispenser for optimal operating.
3. Fit the collecting tray/drip tray does not protrude beyond the surface.
4. Fit the silicon ring in the threaded part of the tap. Screw the tap tool below the dispensing unit.
5. Clean the dispensing unit as described in the instructions in Chapter “Dismantling and cleaning the
beer dispenser”.
6. Check that the main switch at the back of the dispenser is set to “0” and plug the plug into the main
socket.
7. Set the main switch to “I”.
8. Check the LED indicator to ensure that the dispenser is on.
12