20
EN
BEFORE THE FIRST USE
Cleaning
1.
Remove the cover of the water tank.
2. Pour water into the water tank, the water level should not exceed the MAX mark in
the water tank. Then close the tank cap.
Note
: The appliance is supplied with a water tank for easy cleaning, you can first fill
the water tank with water and then insert the water tank into the appliance.
3. Insert the coffee sieve into the sieve holder (without coffee in the coffee sieve).
4.
Place a cup on the drip plate. Make sure that the control dial is in a horizontal
position (off position).
5.
Insert the plug into the socket and press the ON/OFF button. The operation
indicator lights up and the SINGLE CUP/DOUBLE CUP/STEAM
indicators flash.
6. The machine starts to heat up. When the
SINGLE CUP/DOUBLE CUP/STEAM
indicators light up constantly, preheating is complete. Press the DOUBLE CUP
button, wait a moment, the water flows out.
7.
When the appliance stops pumping water, switch it off, clean the tank and fill it with
fresh water. Now you can start brewing.
Note
: The first time you pump water, you may hear unusual noises. This is normal, the
machine lets the air out of the machine. After about 20 seconds the noise disappears.
Preheating
1. Pour water into the water tank, the water level should not exceed the MAX mark in
the water tank. Then close the tank cap.
2.
Insert the coffee sieve into the sieve holder and make sure that the tube of the sieve
holder is aligned with the groove in the machine. From the LOCK position, turn the
sieve holder counterclockwise until it is in the CLOSE position.
3.
Place a cup on the drip plate. Make sure that the control knob is in horizontal
position (Off position).
4.
Insert the plug into the socket and press the ON/OFF button. The operation
indicator lights up and the SINGLE CUP/DOUBLE CUP/STEAM
indicators flash.
5. The machine starts to heat up. When the
SINGLE CUP/DOUBLE CUP/STEAM
indicators light up constantly, preheating is complete.
