background image

Safety Warnings

Your safety is important to us. Please 

read this information before using your 

cooktop. 

This appliance is designed for private and 

home use and intended for heating food. 

Use the products exclusively for the inten-

ded purpose!

Installation

Electrical Shock Hazard

•  Disconnect the appliance from the ma-

inselectricity supply before carrying out 

any work or maintenance on it.

•  Connection to a good earth wiring 

system is essential and mandatory. Alte-

rations to the domestic wiring system

•  must only be made by a qualified elec-

trician. Failure to follow this advice may 

result in electrical shock or death.

Cut Hazard

•  Take care - panel edges are sharp. Failure 

to use caution could result in injury or 

cuts.

Important safety instructions

•  Read these instructions carefully before 

installing or using this appliance.

•  No combustible material or products 

should be placed on this appliance at 

any time.

•  Please make this information available to 

the person responsible for installing the 

appliance as it could reduce your installa-

tion costs.

•  In order to avoid a hazard, this appliance 

must be installed according to these 

instructions for installation.

•  This appliance is to be properly installed 

and earthed only by a suitably qualified 

person.

•  This appliance should be connected to 

a circuit which incorporates an isolating 

switch providing full disconnection from 

the power supply.

•  Failure to install the appliance correctly 

could invalidate any warranty or liability 

claims.

Operation and maintenance

Electrical Shock Hazard

•  Do not cook on a broken or cracked 

cooktop. If the cooktop surface should 

break or crack,switch the appliance off 

immediately at the mains power supply 

(wall switch) and contact a qualified 

technician.

•  Switch the cooktop off at the wall before 

cleaning or maintenance. 

•  Failure to follow this advice may result in 

electrical shock or death.

Health Hazard

•  This appliance complies with electroma-

gnetic safety standards.

Hot Surface Hazard

•  During use, accessible parts of this 

appliance will become hot enough to 

cause burns.

•  Do not let your body, clothing or any item 

other than suitable cookware contact the 

Induction glass until the surface is cool.

•  Beware: magnetisable metal objects 

worn on the body may become hot in 

the vicinity of the cooktop. Gold or silver 

jewellery will not be affected.

•  Keep children away.
•  Handles of saucepans may be hot to 

touch. Check saucepan handles do not 

overhang other cooking zones that are 

on. Keep handles out of reach of children.

•  Failure to follow this advice could result 

in burns and scalds.

Cut Hazard

•  The razor-sharp blade of a cooktop 

scraper is exposed when the safety cover 

is retracted.Use with extreme care and 

always store safely and out of reach of 

children.

!

Summary of Contents for KF905EDF























Reviews: