background image

13

Using the Timer

4. 

Touch timer control again, the “1” 

will flash.

5. 

Set the time by touching the slider 

control (e.g.9), now the timer you set is 

95 minutes.

6. 

When the time is set, it will begin to count down immediately. The 

display will show the remaining time

NOTE: 

The red dot next to power level indicator

will illuminate indicating that zone is selected.

Other cooking zone will keep operating if they are turned on previously.

5. 

When the time is set, it will begin to count down immediately. The 

display will show the remaining time

6. 

Buzzer will beep for 30 seconds and the timer indicator shows “- - “ 

when the setting time finished.

9.2 Setting the timer to turn one or more cooking 

zones off

If the timer is set on one zone:

1. 

Touching the heating zone selection control

that you want to set the timer for.

3. 

Set  the  time  by  touching  the  slider 

control. (e.g. 5)

2. 

Touch timer control, the timer 

display will show „10“  and the „0” will 

flash.

7. 

When cooking timer expires, the corresponding

cooking zone will be switch off automatically.

!

EN

Summary of Contents for KF905EDF























Reviews: