background image

11

Locking the controls

8. Locking the Controls

•  You can lock the controls to prevent unintended use (for 

example children accidentally turning the cooking zones 

on).

•  When the controls are locked, all the controls except the 

ON/OFF control are disabled.

To lock the controls

Touch the keylock control. 

The timer indicator will show „Lo“

To unlock the controls

1. Make sure the ceramic hob is turned on.

2. Touch and hold the keylock control for a while.

3. You can now start using your ceramic hob.

Over-Temperature Protection

A temperature sensor equipped can monitor the tempera-

ture inside the ceramic hob. When an excessive temperature 

is monitored, the ceramic hob will stop operation automa-

tically.

Residual Heat Warning

When the hob has been operating for some time, there will 

be some residual heat. The letter “ H ”appears to warn you 

to keep away from it.

Auto Shutdown

Another safety feature of the hob is auto shut down. This oc-

curs whenever you forget to switch off a cooking zone. The 

default shutdown times are shown in the right table:

When the hob is in the lock mode, all the controls are disab-

le except the ON/OFF, you can always turn the ceramic hob 

off with the ON/OFF control in an emergency, but you shall 

unlock the hob first in the next operation

!

Power 

level

Default 

timer (h)

1

8

2

8

3

8

4

4

5

4

6

4

7

2

8

2

9

2

EN

Summary of Contents for KF905EDF























Reviews: