45
Installation
When you have installed the hob, make sure that
• the power supply cable does not run through cupboard doors or drawers.
•
there is adequate flow of fresh air from outside the cabinetry to the base of the hob.
• if the hob is installed above a drawer or cupboard space, a thermal protection barri-
er is installed below the base of the hob.
• the isolating switch is easily accessible by the customer.
!
Cautions
•
The induction hob must be installed by qualified personnel or technicians.
Please never conduct the operation by yourself.
• The hob must not be installed directly above a dishwasher, fridge, freezer,
washing machine or tumble dryer, as the humidity may damage the hob
electronics.
• The induction hob shall be installed such that better heat radiation can be
ensured to enhance its reliability.
• The wall and induced heating zone above the table surface shall be heat-
resistant. Use heat resistant adhesive.
Fixing the brackets
The unit should be placed on a stable, smooth surface (use the packaging).
Do not apply force onto the controls protruding from the hob.
A:
Screw
B:
Bracket
C:
Screw hole
D:
Base
A:
Hob
B:
Table
C:
Bracket
Adjusting the bracket position to suit for different work surface’s thickness.
Fix the hob on the work surface by screwing four brackets on the bottom
of the hob (see picture).
A
A
C
C
B
B
EN
