33
Programming
EN
Start / Pause / Standby
Energy saving function
Pyrolytic cleaning
General notes
Automatic timer
• You can start your baking process by pressing .
• To pause the cooking process, simply press the -key
one time.
• To cancel the heating and baking process, press the
key a second time.
• Hold the key for 5 seconds. The display light will switch
of and stay in energy saving state.
• If no operation takes place within 10 minutes, the display
will also switch to energy saving state automatically.
• Pushing any key leads to an interruption of the energy
saving state.
With this function, the oven heats up to a very high tem
-
perature (450 ° C) to make the cleaning easier.
• Rotate the function knob K1 to select the pyrolytic
function.
• Touch
to conirm your selection. The standard time is set
to 2:00 hours.
• Rotate the function knob K1 again to change the time
adjustment. For the pyrolytic cleaning mode, the time can
only be set to 1:30 and 2:00 hours intervals.
• During the status of reservation, press cancel
button once, time and temperature of reservation
menu will be shown with menu icon lighting cons-
tantly. Press again, screen returns to clock, or press
start button to return to reservation status.
• Reminder function is invalid during automatic timer
mode status.
• When the oven door is not closed, the appliance does
not allow the pyrolytic process to start.„DOOR“ and
„PYA“ would appear on the screen.
• When the oven temperature is above 320 °C, the PCB
does not react to a touch of the key . The display
will show „COOL“ and „PYA“. When the temperature
is below 200 °C, you can touch . When the tempera-
ture is higher than 200 °C, the oven will switch by tou-
ching
automatically ater one touch in stand-by.
• For the pyrolytic cleaning, make sure that the
oven cavity is empty! Danger of burning!
• While the process is running, do NOT try to open
the door! Danger of burning!
•
Ater the process has inished, do not disconnect
the appliance from the mains for 1 hour (Cooling)
• The oven lamp is activated for all the oven heating types
(except for pyrolytic cleaning)
•
If you have selected a heating type but didn’t conirm
by touching the within 5 minutes, current time will be
displayed again (Stand-By mode). The heating type you’ve
selected before will be lost.
• To make sure that the appliance has recieved your touch
operation correctly, a beep sound will occur.
•
When the baking process has inished, you’ll hear a 5
times-buzzer.
You can only use this function when you have set the
current time before.
• Push the key .
• By rotating the selection knob K1, choose your desired
target start hour. This value must be in an interval between
0 - 23.
•
To conirm the setting, push the
key again.
• Now adjust the target starting minute by rotating the
selection knob K2.
• Press the key to validate your selection.
• Now select the the heating type by the function knob K1
and with the selection knob K2 the temperature. Then
push the key
to conirm.
• Now coose a cooking time by rotating the function knob
K1.
• Push the
key again to conirm your selection. Now the
icon
=
will appear instantly on the display. The target start
time can be checked by pushing the key
. Ater 3 seconds,
the clock (last displayed value) will appear again.
• When the desired start time is reached, the appliance will
start working automatically, indicated by a buzzer sound.
• The icon
=
will disappear from the display.
!
