Kiwi Technics Kiwi-30, User Manual

Page: 35 / 66

35
Firmware Updates
Firmware Updates
The Kiwi-30 is put into update mode
by pressing and holding the MIDI
CHANNEL button as the Kiwi-30 is
powered on. The update file can
then be played into the Midi In port.
As the files are playing into the Kiwi-
30 the Digit Leds will cycle. If the
update has no errors then ' gd' will
display on the digits. If there was an
error then 'Err' will display and the
update should be retried.
Note – If the LEDs show 'Err' there
was an error during the update and
you should retry the update. If the
Program file should stop mid send
this is normally the PC midi
hardware not coping with the large
file size. Try slowing the send or use
a different brand of midi interface.
Note – During update all activity in the
voice board is stopped. This can cause
random noise to sound out the output
as the MUX is no longer being updated
and this can get quite loud. It is
recommended to turn down the volume
during this process.
www.kiwitechnics.com Kiwi-30 Upgrade User Manual v121