Kiwi Technics Kiwi-30, User Manual

Page: 46 / 66

46
Midi Data
Function Transmitted Recognized Notes
Basic Channel 1-16 1-16 If Omni selected the Kiwi1000 will recognize any midi channel
Note Number 0-127
Mode O O Voice Modes need to be changed using Midi Control or Sysex commands
Velocity Note On
Note Off
X
X O
O
Aftertouch
Keys
Channels X
X O
O
Pitch Bender X O
Control Change O O Only if Midi CC option is Enabled. See Control Change Tables for details
Program Change O 0-127 If CC0=0 then CC32 & Program change select Tone 1-512. Each CC32 number (0 -
3) accesses 128 Tones using Program Change (0-127)
System Exclusive O O Only if Midi Sysex option is Enabled - See Sysex Table for details
System Real Time Clock
Commands O O Will Transmit from Master Clock if Clock Output is enabled. Input clocks are passed
through to midi out unaltered and with minimal delay. Midi Clocks are recognized
within the Kiwi1000 only if the clock source has been set to midi on the Master clock
source
Modulation X O
Notes X=No O=Yes
Supported Midi Messages Status Second Third Notes
Note Off $8n (128-143) $kk $yy n = 0-15 midi channel
kk = note number (0-127)
yy = Don't care (ignored)
Note On $9n (144-159) $kk $yy n = 0-15 midi channel
kk = note number (0-127)
yy = 0=Note Off, 1-127 = Note Velocity.
Polyphonic Aftertouch $an (160-175) $kk $yy n = 0-15 midi channel
kk = note number (0-127)
yy = Aftertouch level
Continuous Controllers $bn (160-191) $kk $yy n = 0-15 midi channel
$kk & $yysee CC table
Program Change $cn (192-207) 0-127 --- n = 0-15 midi channel
If CC0 = 0 then
for CC32 = 0 for Tones 1-128
1 for Tones 129-256
Channel Aftertouch $dn (208-223) $kk ---
Pitch Bend $en (224-239) $kk $yy n = 0-15 midi channel
kk = Least Significant 7 bits
yy = Most Significant 7 bits
Note - Internal hardware can only support 12 bits so the 2 LSB are dropped
Note $xx = hex number
www.kiwitechnics.com Kiwi-30 Upgrade User Manual v121