Document No：KE-4032-02 Page：7/19
3. Piping Installation
3-1. Recommended Service Environments
The product is not designed for explosion-proof. Do not install it in any
explosive environment to prevent accidental mishaps. Also do not install it in
any corrosive environment which will affect the service life.
This product is indoor type. Do not install the product outdoor, in location
subject to water splash or high humidity.
Do not install the product where rainwater may gather high enough to submerge
the product installed on piping.
Do not install the product where the vibration generated by nearby facilities
might affect the function of the product. Otherwise, take appropriate
protective measures to insulate the vibration
Do not install the product where it is directly exposed to the sunlight.
Otherwise, take appropriate protective measures such as installation of a cover
or a shelter. Raising the temperature of the product may cause malfunction and
affect service life of the product
Protect the product appropriately in environments where salty water, snow or
freeze may affect functions of the product.
Keep a sufficient room around the installed product to ease dismantling,
disassembly, manual operation, maintenance and re-installation of the product.
Where the product is exposed to radiant heat, take appropriate protective
measures such as installation of a cover or a shelter.
Where access of passersby to the product is concerned about, such as where
the piping directly faces to a road, take appropriate protective measures like
installation of a fence or an enclosure.
