Kitvision rush hd100W, User Manual

Page: 13 / 20

24 25
[...continued]
Mounting onto your board
3. Rotate the wheel on the Body Piece anticlockwise to tighten the Tilting Head Adaptor, Quick Release Adaptor socket or
the camera itself onto the Body Piece.
4. Use the secure strap to link up the camera and secure piece of Flat Mount. To fasten the mount, please refer to
‘Securing the strap’, page 20.
5. Peel off the protective film which covers the double-sided adhesive on the secure piece and attach the secure piece
to a suitable location on the board.
Note: When mounting your camera with the Tilting Head Adaptor or Quick Release Adaptor socket, please make sure you
push the orientation column on the Body Piece down. When mounting your camera directly onto the Body Piece,
please pull the orientation column on the Body Piece up.
Note: If you want to make changes to the horizontal position of the camera, you can rotate the wheel on the Body Piece
clockwise, adjust the camera position, and rotate anticlockwise to re-tighten the mount.
Mounting onto your bike helmet/backpack
Assembling the Strap Mount
1. Attach the Strap Wings to the left and right side of the Body Piece accordingly.
Note: Please make sure you install the Strap Wings with the flat eva pad facing downwards and fit the gears of the
Strap Wings and the Body Piece correctly on both sides.
2. Insert the bolt into the slide rail from the hole and tighten the nut.
Note: The angle of the Strap Wings can be adjusted: simply loosen the nut, adjust the Strap Wings and re-tighten the nut.
Mounting onto your bike helmet/backpack
1. Loop the strap of the Strap Mount through one vent of the Strap Wing from the top.
Next, follow either of the below steps according to your mounting object:
• If you want to mount onto your bike helmet, loop the strap through the vent of
the bike helmet and pull it out from the opposite helmet vent
• If you want to mount onto your backpack, loop the strap through one side of the
backpack shoulder belt and back through the other side
2. Loop the strap through the opposite vent of the Strap Wing from the bottom.
3. Loop the strap through the vent of the clip from the bottom.
[continued...]
Rotate the wheel