14
15
Care for your Immerse 360 Duo Action camera
Please DON’T:
•
Get the camera wet
•
Drop the camera as this will invalidate your warranty
•
Open up the camera. There are no user serviceable parts inside
•
Expose the camera to extreme temperatures or rapid changes of hot to cold or vice versa
Please DO:
•
Clean the camera with a soft dry cloth and no detergents
Troubleshooting
No power
Turn off the camera, remove SD card from the camera and wait for five minutes. Charge the
camera for 1 hour. Then turn on the camera while still connected to the power source.
No SD card
Check that there is a compatible and formatted SD card in the camera.
SD card error
Save files you want to keep onto a PC and then format the SD card.
Camera won’t turn on
Charge the camera using a mains power adaptor for 1 hour and then try to turn on again.
Blurry photos
You need to hold the camera still whilst pressing the Shutter/OK (7) button.
We hope you’ve now got all the information you need to get started, but if you’re having problems with anything,
please feel free to contact us at:
or
visit www.kitvision.co.uk
Please do not attempt to open this product. There are no user serviceable parts inside, in particular if your product has an
embedded, non-replaceable battery, do not attempt to access or remove the battery as this may cause personal injury and
will damage the product.
Making any attempt to open the product or carry out repair voids any and all warranties
We apologise for any inconvenience caused by minor inconsistencies in these instructions, which may occur as a result of product
improvement and development.
