Kiturami KRH-35B, Technical Information And Installation Servicing Instructions

Page: 4 / 39

1. OVERALL VIEW
These instructions are suitable for KRH Series hybrid Wood fired boiler;
Do not forget this instruction.
To ensure the correct installation, commissioning and servicing of domestic central heating system.
NEW CONCEPT & NEW TECHNOLOGY
1. Exhaust / intake phase modulation system
As ventilation quantity is modulated by MCU that checks the rising speed of water temperature in real time, the
optimum combustion condition and long heating are realized.
2. The advanced exhaust / intake system
The exhaust/intake system is applied to wood fired boiler for the first time in the country so as to prevent backfire in the
combustion chamber during combustion. Thus, the internal pressure of combustion chamber becomes negative(minus)
and fan operates only when necessary, i.e., turbo system that increases heat power in the shortest time is applied.
3. The first domestic oil igniting system
After supplying firewood, there is no need to take pains to ignite it, but firewood can be easily ignited only with igniting
button.
4. special hot water coil heat exchange system of high efficiency
As hot water heat exchanger is placed at the highest positon (highest temperature part), boiling in the internal box of
boiler is prevented and abundant hot water can be used. Since hot water of heat exchanger flows up and down in
double structure, heat exchange rate is increased to supply sufficient water for bath.
5. hybrid systems of firedwood and oil
As firewood combustion is detected by internal sensor, oil burner automatically operates when combustion stops so as
to supply heat for heating.
6. Heat exchange system of high efficiency
As water tube grate and upper fire tube are installed inside, combustion gas is emitted after heat is fully exchanged inside
heat exchanger.
1-1 INFORMATION
4페이지