KITO ER2-075S, Owner'S Manual Supplement

Page: 3 / 56

3
Product Specifications and Operational Environment
Standard Specifications
■
Short-time rating : ER2 (100% of rated load) - 60 minutes,
MR2 (100% of rated load) - 30 minutes
Intermittent rating : ER2 (63% of rated load) - 60% ED, MR2 (63% of rated load) - 40% ED
Hoist classification * : ISO-M4,FEM-2m,ASME-H4
Protection : Hoist IP55,Push Button Switch IP65
Push button control : 3-push button control for hook or manual trolley suspension, / 5 or 7-push button control for
motorized trolley suspension
Lift : 3m (standard)
Power supply method : Cabtyre cable
Color : KITO Yellow (Equivalent to Munsell 7.2YR6.5/14.5)
Braking capacity : 150% or more
Applicable rail type : I beam, H beam
Applicable rail width : 150mm – 308mm
Power supply cable : Standard length - 10m
Voltage & motor :
Voltage category
Motor Insulation
Class
Voltage range
Control
Voltage
50Hz 60Hz
230V Class B
220V 220V
24V
(24V~27.8V)
230V 230V
400V Class F
380V 380V
400V 440V
415V —
500V Class B 500V 575V
230/460V Class B
208-230V
110V
(110V~121V)
415-460V
* For more information about the operating conditions and environment, refer to the ER2 Series Electric Chain Hoist
(125kg to 5t) Owner’s Manual, and for the standard dimensions refer to the appendixes in this manual.
The operational environment of the electric chain hoist and motorized trolley is as follows:
NOTE
Operate the electric chain hoist at the rated voltage. •
Do not use the electric chain hoist beyond the short time and intermittent ratings. •
* Hoist classification
Capacity (t) Code ISO ASME FEM
7.5 ER2-075S
M4 H4 1Am
10
ER2-100L
ER2-100S
15 ER2-150S
20 ER2-200S
Product Specifications and Operational Environment
Standard Specifications