KITO ER2-075S, Owner'S Manual Supplement, Page: 8 / 56

8
Checks on Unpacking
Capacity
Load Chain : diameter
(mm)
Stamp interval
7.5t
11.2 12 links
10t
15t
20t
RH-DAT 0000 RH-DAT
Stamp interval
First stamp Second stamp Second stamp
Front side : RH-DAT
or FT-DAT
Back side : H-23
Front side : Lot No. of the Load Chain
(4 digits)
Back side : KITO
After unpacking, confirm chain stamp, and make a record of serial number and an inspection as shown below.
Be sure to check that the Load Chain is for the electric chain hoist ER2. The Load Chain of other models •
(such as model ES or ER) or for different capacity cannot be used.
Failure to use a proper chain may result in death or serious injury due to the drop of the lifted load.
Mandatory
Mandatory
The load chain identification stamp (RH-DAT) is indicated on at intervals of chain links. Make sure that the Load
Chain is of a chain size (wire diameter) appropriate for ER2 referring to the table below.
DANGER
DANGER
Fill in the table in the right with product's Lot ●
No., Serial No. (described in the product
nameplate), date of purchase and the name
of the sales shop where you purchased the
product.
* When requesting repair or ordering a hoist
part, please inform us of these pieces of
information together.
Item Electric chain hoist Motorized trolley Manual trolley
Lot No. ER2A– MR2A– TS2–
Serial No.
Date of purchase
Name of the sales shop
Checking Chain Stamps
■
Checks on Unpacking
Checking Chain Stamps / Recording the Product No. / Recording the Initial V
alue
Recording the Product No.
■
Recording the Initial Value ■
For later maintenance or inspection, at the
●
time of unpacking, fill in the table in the right
with the dimension "a" between embossed
marks on the Bottom Hook, the width of the
hook "b" and the thickness of the hook "c".
(These values are used for checking. Please
also record the value for the top hook of ER2
when your product is suspended with a hook.)
Initial dimensions
b
c
a
Embossed marks
Top Hook
(For ER2 only)
Dimension a mm
Dimension b mm
Dimension c mm
Bottom Hook
Dimension a mm
Dimension b mm
Dimension c mm