9
Assembling Your Bowl Lift Mixer
To Attach Bowl
1.Be sure speed control is OFF and
stand mixer is unplugged.
2.Place bowl lift handle in down
position.
3.Fit bowl supports over locating
pins.
4.Press down on back of bowl
until bowl pin snaps into spring
latch.
5.Raise bowl before mixing.
6.Plug into a grounded 3 prong
outlet.
To Raise Bowl
1.Rotate handle to straight-up
position.
2.Bowl must always be in raised,
locked position when mixing.
3.Turn beater to right, hooking
beater over the pin on shaft.
4.Plug into a grounded 3 prong
outlet.
To Remove Flat Beater,
Wire Whip, or PowerKnead™
Spiral Dough Hook
1.Slide speed control to OFF and
unplug.
2.Press beater upward and turn to
the left.
3.Pull beater from beater shaft.
Household Stand Mixer
Speed Control
Plug into a grounded 3 prong
outlet. Speed control lever should
always be set on lowest speed for
starting, then gradually moved to
desired higher speed to avoid
splashing ingredients out of bowl.
See the “Speed Control Guide”
section.
Pin
Raise
Electrical Shock Hazard
Plug into a grounded 3 prong
outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in
death, fire, or electrical shock.
To Lower Bowl
1.Rotate handle back and down.
To Remove Bowl
1.Be sure speed control is OFF and
stand mixer is unplugged.
2.Place bowl lift handle in down
position
3.Remove flat beater, wire whip,
or spiral dough hook.
4.Grasp bowl handle and lift
straight up and off locating pins.
To Attach Flat Beater,
Wire Whip, or PowerKnead™
Spiral Dough Hook
1.Slide speed control to OFF and
unplug.
2.Slip flat beater on beater shaft.
OFF/0
STIR
RESET
Summary of Contents for KV25G0XCV - Caviar, Professional 5
Page 1: ...BOWL LIFT STAND MIXER INSTRUCTIONS AND RECIPES 1 800 541 6390 Details Inside 9708307C ...
Page 85: ......
Page 86: ......
Page 87: ......