10
Attaching the Pouring Shield*
1.Make sure the speed control lever
is set to the OFF/0 position.
2.Unplug the stand mixer.
3.Attach desired accessory and raise
the mixing bowl.
4.Slide pouring shield collar around
beater shaft, centering collar over
rim of bowl.
Using the Pouring Shield
Pour ingredients into the mixing
bowl through the chute portion of
shield.
IMPORTANT: Make sure the guides
on the bottom of the chute rest on
the rim of the bowl to keep
ingredients from falling outside the
bowl as they are added.
Using the Pouring Shield*
Removing the Pouring Shield
1.Make sure the speed control lever
is set to the OFF/0 position.
2.Unplug the stand mixer.
3.Remove pouring chute from collar.
4.Slide pouring shield collar off
bowl.
5.Lower the bowl support by
turning the bowl-lift lever
clockwise.
6.Remove accessory and the mixing
bowl.
Cleaning the Pouring Shield
Wash in warm sudsy water. If you
wish, you may place on the top rack
of your dishwasher.
*If Pouring Shield is included.
Auto-Reset Motor Protection
If the stand mixer stops due to
overload, slide the speed control
lever to OFF. After a few minutes,
the stand mixer will automatically
reset. Slide the Speed Control Lever
to the desired speed and continue
mixing.
If the stand mixer does not restart,
see the “Troubleshooting Problems”
section.
Pouring
Chute
Summary of Contents for KV25G0XCV - Caviar, Professional 5
Page 1: ...BOWL LIFT STAND MIXER INSTRUCTIONS AND RECIPES 1 800 541 6390 Details Inside 9708307C ...
Page 85: ......
Page 86: ......
Page 87: ......