background image

5

2. 

You can dispense water by the ounce, cup, or liter. The default 

unit is ounces. To switch to cups or liters, press the LIGHT button.
Default, minimum, and maximum volumes are listed below.

Units 

Default 

Minimum 

Maximum

Ounces 

128

Cups 

1/4 

16

Liters 

0.25 

0.05 

4.00

3. 

Press the LOCK and OPTIONS buttons to adjust the volume 

as desired. The LOCK button increases the volume, and the 

OPTIONS button lowers the volume.

NOTES:

 

When increasing or decreasing the volume, the control 

may stop responding if an adjustment button is held for 

approximately 10 seconds or longer. Release the button for 

approximately 2 seconds, then continue making adjustments.

 

Most coffee cups (commonly 4 to 6 oz [118 to 177 mL] per 

cup) are not the same size as a measuring cup (8 oz [237 mL]). 

You may need to adjust the volume to avoid unintentionally 

overfilling coffee cups.

4. 

To dispense water, press a sturdy glass against the water 

dispenser pad OR place the glass below the water dispenser and 

press the MEASURED FILL button. Hold the glass close to the 

water dispenser spout to ensure that the water dispenses into the 

glass.

NOTE:

 While dispensing water, the digital display will count down 

how much water remains to be dispensed, according to the volume 

you selected. The flow of water will automatically stop once the 

desired volume has been dispensed.

5. 

To stop dispensing before the selected volume has been 

dispensed, remove the glass from the dispenser pad OR press the 

MEASURED FILL button a second time.

NOTE:

 If you stop dispensing before the desired volume has been 

dispensed, the digital display will continue to show how much 

water remains to be dispensed. The display will turn off after 1 

minute of inactivity.
To select a new volume or start dispensing the same volume 

again, you must first finish dispensing the selected volume, or turn 

off the Measured Fill feature (either by waiting 1 minute so it will 

automatically turn off or by pressing ICE MODE to manually turn it 

off) and then turn it back on.

The Ice Dispenser

Ice dispenses from the ice maker storage bin in the freezer when the 

dispenser pad is pressed. To turn off the ice maker, see “Ice Maker 

and Storage Bin.”
Your ice maker can produce both 

crushed and cubed ice. Before 

dispensing ice, select which type of 

ice you prefer by pressing the 

ICE MODE button.
The display screen indicates which 

type of ice is selected.
For crushed ice, cubes are crushed before being dispensed. This may 

cause a slight delay when dispensing crushed ice. Noise from the ice 

crusher is normal, and pieces of ice may vary in size. When changing 

from crushed to cubed, a few ounces of crushed ice will be dispensed 

along with the first cubes.

To Dispense Ice:

1. 

Make sure the desired type of ice is selected. To switch between 

cubed and crushed, press ICE MODE.

2. 

Press a sturdy glass against the ice dispenser pad. Hold the glass 

close to the ice guide to ensure that the ice dispenses into the 

glass.

IMPORTANT:

 You do not need to apply a lot of pressure to the 

pad in order to activate the ice dispenser. Pressing hard will not 

make the ice dispense faster or in greater quantities.

3. 

Remove the glass to stop dispensing.

NOTE:

 Ice may continue to dispense for several seconds after 

removing the glass from the pad. The dispenser may continue to 

make noise for a few seconds after dispensing.

The Dispenser Light

When you use the dispenser, the light will automatically turn on. If you 

want the light to be on continuously, you may choose either ON or 

DIM. The display screen indicates which mode is selected.

ON:

 Press LIGHT to turn the dispenser light on.

DIM:

 Press LIGHT a second time to select DIM mode. The dispenser 

light will remain on, but at a lower intensity.

OFF:

 Press LIGHT a third time to turn the dispenser light off.

If the dispenser lights do not appear to be working as described in 

“Water and Ice Dispensers” (in the User Instructions, User Guide, or 

Use & Care Guide) or if the interior lights do not illuminate when either 

door is opened, call for assistance or service. See either the front 

cover or the Warranty for contact information.

The Dispenser Lock

The dispenser can be turned off for easy cleaning or to avoid 

unintentional dispensing by small children and pets.

A

A. Water dispenser spout

Cut Hazard

Use a sturdy glass when dispensing ice.
Failure to do so can result in cuts.

WARNING

A

A. Ice guide

ON

DIM

OFF

CUBED

CRUSHED

Summary of Contents for KRSC700HBS

















Reviews: