- 25 -
Accessing Components Behind
The Control Panel
The following major components are serviced by removing
the control panel:
- Computer Board
- Burner Valves & Switches
- Capacitive Glass Panel
- Hi Limit Thermal Switch
- Cooling Fan Thermal Switch
ELECTRONICS
BOARD
CONTROL PANEL
SCREWS (3)
HALOGEN
HALOGEN
CONTROL PANEL
END CAP
SCREW
END CAP
SCREW
FIGURE 6
Removing The Electric Range Control Panel
Refer to Figure 6 for the following steps.
1. Unplug the power cord plug from the AC receptacle.
2. Open the oven door, and remove the three screws from under the
control panel and the two from the end caps, then close the oven
door.
3. On gas models, remove the four (4) burner valve stem nuts.
4. Lift the control panel and set it on the maintop so that you can access
the components.
(On Slide-In Models Only)
(On Slide-In Models Only)
Summary of Contents for KERC500B
Page 1: ...KITCHENAID ELECTRONIC RANGE CONTROLS B D LINE WALL OVENS JOB AID Part No 4317169 ...
Page 4: ... iv NOTES ...
Page 47: ... 43 NOTES ...
Page 93: ... 45 QUESTIONS ...