5
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools Needed
Parts Supplied
■
Natural gas regulator 4 W.C.
■
Left side shelf
■
Side shelf push bar
■
Grill cover
■
Battery
■
Warming rack
■
Cooking grid
■
Side burner cooking grid
■
Natrual gas hose with quick connector
Location Requirements
Select a location that provides minimum exposure to wind and
traffic paths. The location should be away from strong draft areas.
Do not obstruct flow of combustion and ventilation air.
Clearance to combustible construction for freestanding outdoor
grills:
■
A minimum of 24" (61 cm) must be maintained between the
front of the grill hood, sides and back of the grill and any
combustible construction.
■
A 24" (61 cm) minimum clearance must also be maintained
below the cooking surface, and the grill shall not be used
under overhead combustible construction.
Rotisserie (accessory)*
If you equip your grill with a rotisserie, a 6" (15.2 cm) minimum
clearance is needed for the rotisserie motor.
A grounded, 3-prong outlet located to the left of the grill is
required.
*See “Assistance” section to order.
Product Dimensions
The model/serial number rating plate is located on the inside of
the left cabinet door. See the following illustration.
■
Phillips screwdriver
■
Wrench or pliers
■
Pipe wrench
■
Scissors or cutting pliers
(to remove tiedowns)
■
Noncorrosive leak-
detection solution
WARNING
Fire Hazard
Do not use grill near combustible materials.
Do not store combustible materials near grill.
Doing so can result in death or fire.
A. Model/serial number plate
56
⁵⁄₈
"
(143.8 cm)
12
⁵⁄₈
"
(32 cm)
27
⁷⁄₈
"
(70.8 cm)
11
⁷⁄₈
"
(30.2 cm)
48
²³⁄₃₂
"
(123.8 cm)
23
¹⁄₄
" (59 cm)
A
Summary of Contents for 730-0336D
Page 21: ...21 Notes ...
