background image

ENGLISH

CARE AND CLEANING

  

|  

13

TIPS FOR GREAT RESULTS

CARE AND CLEANING

CLEANING THE METAL FOOD GRINDER ATTACHMENT AND 
ACCESSORIES

For best results, grind meat that is very cold 

or partially frozen. The grinder parts can 

be pre-chilled in the refrigerator or freezer 

before use to maintain a cold grinding 

temperature.
For more tender results, some meats can be 

ground twice. However, fatty meats should be 

ground only once.
To grind bread for crumbs, be sure that bread 

is either oven-dried thoroughly to remove all 

moisture, or not dried at all. Partially dried 

bread may jam the Metal Food Grinder 

attachment.

NOTE: 

Very hard, dense foods such as 

completely dried homemade bread should 

not be ground in the Metal Food Grinder 

attachment. Homemade bread should be 

ground fresh and then oven- or air-dried.
If using natural casings, it is recommended to 

first soak them in cold water for 30 minutes 

to remove excess salt, then rinse several 

times by running cold water through the 

entire length of the casing. For best results 

for sausage, refer also to the instructions that 

came with the casings.

1  

Use the cleaning brush to clean the main housing and 

other accessories, including the grinding plates.

2  

The following parts are dishwasher-safe, top rack only: 

sausage stuffer plate, sausage stuffer tubes, cleaning 

brush, and food pusher.

3  

The following parts should be hand-washed only,  

using warm, soapy water and drying thoroughly:  

main housing, grind screw, collar, tray, grinding  

plates, and blade.

HELPFUL HINTS

W11204954A_01_ENv02.indd   13

4/2/18   6:53 PM

Summary of Contents for 5KSMMGA















Reviews: