background image

English

3

SAVE THESE INSTRUCTIONS

This product is designed for household use only.

STAND MIXER SAFETY

9. 

 Do not operate Stand Mixer with a damaged cord or plug or 

after the Stand Mixer malfunctions, or is dropped or damaged 

in any manner. Return appliance to the nearest Authorised 

Service Centre for examination, repair or electrical or 

mechanical adjustment.

10. 

 The use of attachments not recommended or sold by 

KitchenAid may cause fire, electric shock, or injury.

11. 

Do not use the Stand Mixer outdoors.

12. 

 Do not let the cord hang over edge of table or counter.

13. 

 Remove flat beater, wire whip, or dough hook from Stand 

Mixer before washing.

14. 

 This appliance is intended to be used in household and similar  

applications such as: 

- staff kitchen areas in shops, offices and other  

working environments 

- farmhouses 

- by clients in hotels, motels and other residential type 

environments 

- bed and breakfast type environments.

Electrical requirements

Wattage: 275 W
Voltage: 220-240 V
Hertz: 50-60 Hz
NOTE: If the plug does not fit in the outlet,  

contact a qualified electrician. Do not modify  

the plug in any way. Do not use an adapter.

Do not use an extension cord. If the power 

supply cord is too short, have a qualified 

electrician or serviceman install an outlet near 

the appliance.

Electrical Shock Hazard

Plug into an earthed outlet.
Do not remove earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these 
instructions can result in 
death, fire, or electrical shock.

STAND MIXER SAFETY

W11090745A_ENv14.indd   3

2/27/17   2:58 PM

Summary of Contents for 5KSM45A

















Reviews: