background image

Dear Customer 

Please   read   these   operating   instructions   carefully.  Above   all,   please   observe   the
“safety” section on the first few pages. Please retain these operating instructions for
later reference. Pass them on to any subsequent owners of the appliance.

SAFETY 

The safety aspects of this appliance comply with accepted technical standards and 
SAA Standards. However, as the manufacturer we also believe it is our responsibility 
to familiarize you with the following safety instructions

1.Remove and safely discard any packaging material and promotional labels before
using this appliance for the first time.
2. To eliminate a choking hazard for young children, remove and safely discard the
protective cover fitted over the pins of the power plug when unpacking this appliance
for the first time. 
3. Do not place the appliance near the edge of a bench top, counter or table during
operation.   Ensure   that   the   surface   is   level,   clean   and   free   of   water   and   other
substances.
4. Do not place this appliance on a hot gas or electric burner, or where it could touch a
heated oven.
5. Never place combustible items on the induction cooker.
6.Always operate this appliance on a dry, stable and heat resistant surface.
7.Position the induction cooker clear of walls ,and other heat sensitive materials such

as clothes and curtains. Minimum of 200mm distance.

8.Do not use this appliance on a sink drain board.
9.Do not leave the appliance unattended when in use.
10.If the appliance is not in use for an extended period, disconnect the appliance from
the power outlet.
11. Use only cooking saucepans and pots suitable for use with an Induction Cooker.
12. Extreme caution must be used when the appliance is in use with an induction safe
cooking saucepan. Do not move the appliance during cooking or while a saucepan
remains on the Induction Cooker. 
13.Do not operate the appliance in the vicinity of magnetically sensitive objects (eg
magnetic cards).
14.The outer surface will be hot when the appliance is operating and for some time
after use.
15.Do not place metallic utensils, non-compatible induction cookware, lids, knives,
forks, spoons or other metallic objects on the Induction Cooker glass plate, as these
may be heated and become hot when the appliance is switched on.
16. Do not insert sharp objects into the ventilation system.
17. To avoid overheating , do not place any aluminium foil or metal plates on the
appliance.
18. Do not touch the hot surface of the glass plate. The induction cooker does not heat
up itself during cooking, but the temperature of the cookware heats up the glass plate.
19. Do not heat any opened or unopened cans on the Induction Cooker.
20.Always switch the on/off switch to the off position, switch the appliance off at the
power outlet, then unplug the power cord and cool completely, if appliance is not in
use, before cleaning, before attempting to move the appliance, and when storing the

Summary of Contents for C201-20D5








Reviews: