background image

mode. A beep will sound. Switch ‘off’ at the power outlet and unplug the power cord.

Temperature   can   be   adjusted   at   any   time   during   the   cooking   process,   and   the
Induction Cooker temperatures can be lowered or increased on a scale of 60°C to
270°C                                                      NOTE

 

TIMER MODE

1. Power level and/or Adjustable temperature mode must be selected prior to setting
the Timer mode.
2. To select the Timer mode, press the mode button once, a corresponding indicator
light will illuminate on the LED screen adjacent to the timer mode

icon. A beep will

sound. 
3. Select the desired Time using the Control dial. Turn dial clockwise to increase time
and anti-clockwise to decrease time. The time is adjustable on a scale from 1 minute
to 180 minutes. A beep will sound each time the timing is changed. 
4.   During   the   selection   period,   the   LED   screen   will   continue   to   flash,   when   the
desired   time   has   been   selected,   the   LED   screen   will   cease   flashing   after
approximately 5 seconds and display selected time.

Turning   the   control   dial   slowly   increases   or   decreases   the   timing   by   1   minute
increments, allowing for accurate selection. A beep will sound each time the time is
changed. Turning the control dial very quickly clockwise increases timing by 10
minute increments, anticlockwise  

decreases increments by 10 minute increments in fast

motion selection.                                                             NOTE

5. The timer count down then commences and when the selected time has lapsed, a
beep will sound and the Induction Cooker will automatically switch to stand-by mode.
The Timer mode does not need to be set to use the Power level mode or Adjustable
temperature mode. To readjust power level and temperature during cooking with timer
mode, the function of a pre-set timer will be cancelled.

CLEANING ,MAINTENANCE AND STORAGE 

BEFORE ATTEMPTING ANY CLEANING - FIRST ENSURE THAT THE PLUG 
IS REMOVED FROM THE MAINS SOCKET. DO NOT IMMERSE THIS 
APPLIANCE IN WATER. DO NOT USE HARSH ABRASIVE CLEANSERS.
All the surfaces may be cleaned simply by wiping over with a soft, damp cloth. For 
hard stains, we recommend using a non-scratch cream cleanser.
Use a soft brush to clean the air inlet and outlet. Do not use any sharp objects to clean 
the outets in order to avoid electric shock or damaging the appliance.

DO NOT IMMERSE THE INDUCTION COOKER OR POWER CORD AND 

POWER PLUG IN WATER OR ANY OTHER LIQUID.

TO PREVENT DAMAGE TO THE APPLIANCE DO NOT USE ALKALINE 

CLEANING AGENTS WHEN CLEANING, USE A SOFT CLOTH AND MILD 
DETERGENT.

STORAGE

Before storage, press the power on/off 

 

button once. A beep will sound. Switch off

at   the   power   outlet   and   unplug   power   cord   from   the   power   outlet.   Ensure   the
appliance is completely cooled, clean and dry. Store the appliance flat on the bench or
in  a convenient  cupboard.  Do not  place  anything  on  top  of the  appliance  during

Summary of Contents for C201-20D5








Reviews: