0
CONFIGURATION MODE
This document contains confidential information. Dissemination, publication, copying, or duplication of this document or software described herein without prior written authorization is strictly prohibited.
kitchenbrains.com
Page 9 of 16
© 2020 Kitchen Brains
SLEEP MODE:
To restore Sleep Mode if the 75LCT has been powered up:
1. Disconnect from AC power.
Press gear button. Scroll to
sleep menu option and press
“SLEEP”
and hold until the
screen reads
“Powering Off”
.
2. All functions are shut off.
3. The battery automatically reconnects
electrically the
next time AC Power is applied.
RUN MODE:
All 75LCT monitoring functions take place in RUN Mode.
NOTE THE FOLLOWING:
1. You must press Silence to clear a Temp Alarm
or a Power
Failure alarm even if the condition has corrected itself!
This informs the operator if these alarm conditions
happened, even if no one was present during the alarm.
2. If door is being monitored,
close the door to clear a door
ajar alarm.
3. Open and close the door or press Silence
to clear a
Panic Alarm.
75LCT MULTI-MONITOR |
OPERATING MANUAL
