KisanKraft
®
Warranty Certificate
(
CUSTOMER
C
OPY
)
This warranty is null & void, if you fail to register the warranty with
KisanKraft by sending the KisanKraft Copy with dealer’s stamp.
: +91.80.22178200
Page 34 of 94
•
To move the handle 30 degrees to the left, it is
necessary to loosen the lockup lever for 180
degrees rotation of the handle first. After the
adjustment is finished, lockup the lever again.
Please note that in such a case, the main
speed change lever should also be moved to
the left a little.
For ridge making, working on several beds and bank making in the fields, and for working indoors
where many pillars make the operation very difficult, this machine can make the work very easy and
convenient.
Working with the handle turned to the reverse direction:
•
When working with the handle turned to
the reverse direction, it is necessary to
rotate the turning switchover device
controlling the manual handle 180
degrees at the same time (in the normal
or reverse direction), so that the right
and left steering levers are either
switched over. If this switchover were not
done, most likely the machine would turn
to the wrong direction when he operates
the
steering
lever,
thus
causing
accidents or injury
•
You can hear a clicking sound when the switchover is to the right position.
•
You must not hold the steering handle when you are making the switchover.
•
Pull the main speed change lever upward, and
push it back after the reverse switchover is
finished. Now the steps for speed change are
reversed. That means now there are 2 forward
steps and 6 backward steps. To prevent using
a high speed wrongly at the time of backing, it
is necessary to loosen the backward high-
speed limiter and lock the nut in the direction of
the arrow as shown in the picture
•
For the main speed change lever, the
best operational position is at an
angle of 30 degrees.
•
While using the handle in the reverse
direction, take care not to touch the
muffler when operating the main
speed change lever.
