KisanKraft
®
Maize Harvester
KK-MCH-01D
: +91.80. 6835 7800
Page 11 of 20
3
Walking and Working
2.1 After the engine is started, the machine can walk or work. Before this, adjust the angle and height
of the handle as per your convenience. The following picture shows the controlling position.
Adjust the engine in low speed before joint the walking clutch, to avoid any injury caused by
sudden and fast moving of the machine.
Note
: There is a button near walking clutch handle, you can press to stop walking at once while
emergency statement.
3.2 There are 2 shift levels, the above used for control reward, forward I, forward II, the below one is
used to control high and low speeds.
Note: What calls for special attention is that, the shift level used for forward and backward, is
under the statement of tiller. But for the corn harvester, it is opposite. That means, only by putting
the shift level to backward, we can harvest maize.
The walking clutch should be separate before change shift level.
Warning
: Do not overexert while changing the shift level to avoid contact of your hand with hot
silencer.
