KisanKraft
®
Maize Harvester
KK-MCH-01D
: +91.80. 6835 7800
Page 12 of 20
3.3 Maize harvesting
There is a special clutch for maize harvesting, called harvesting clutch, as shown in fig. Separate the
clutch, to stop harvesting, but the machine can move forward or backward.
Only when the clutch is pushed to joint, the harvesting will take place.
Warning
: To join or separate the harvesting clutch, you have to separate walking clutch first.
3.4 Discharge the corn cob.
If the hopper is full of corn cobs, you should
discharge them, pull the handle to open as
shown in the picture (right)
Warning
: Before discharging, the
walking clutch should be separated to stop
walking of the machine.
3.5 Change direction
If you have finished a row, need to turn around or need to change direction because of other reasons,
but if it is very difficult when all the 4 wheels are on surface, then you should lift the two wheels near
to driver, above the ground, to change the direction easily.
4
Shut down
3.1 Separate the walking clutch
3.2 Turn the accelerator clockwise to the end, minimize the speed of engine
3.3 P
ress switch off button to “OFF”.
Warning
: Press switch off button to “OFF “directly under the state of emergency. Otherwise you
should follow the above mentioned procedure, i.e., not to shut down suddenly while working in high
speeds in order to avoid any hurt or damage.
Maintenance & Service
Shut down the engine before any maintenance. In order to prevent the engine from being started
accidentally, the engine accelerator should be put in the minimum position and for the electric start
models
，
you should remove the start key.
•
The machine should be serviced by authorized dealer unless the user has the proper tools,
maintenance information and maintenance ability.
•
Use original parts or their equivalent products, as poor quality substitutes can damage the
machine.
•
Inspect the screw bolts, parts of joint, ensure they are fastened tightly
•
In order to maintain excellent performance, the machine must be inspected and adjusted
regularly. The routine maintenance also guarantees the long service life.
