KisanKraft
®
AGRICULTURAL INTER-CULTIVATOR
KK-IC-410P
This warranty is null & void, if you fail to register the warranty with KisanKraft by
sending the KisanKraft Copy with dealer’s stamp
. KisanKraft Limited
: +91.80. 6835 7800
Page 12 of 52
Adjustment of clutch cable
(Refer to pictures above)
1.
Unlock nuts on the screw rod.
2.
Instantaneously rotate the screw rod to show the shortest part of the handlebar.
3.
Thread the cable head into clutch plug behind the gear box assembly and make sure the head
is in the big hole of the plug.
4.
Thread the steel wire-rope into the M8 hole of arm plug, and then properly press down the
clutch fork arm to insert the cable head into clutch plug.
5.
Rotate out the screw rod and clip it repeatedly, unlock the clutch handlebar until spring force of
clutch can reset the bar, finally fasten the nuts.
Backshift cable adjustment (
Refer to pictures above)
1.
Unlock the fasten nuts on the screw rod.
2.
Instantaneously rotate the screw rod to show the shortest part of the handlebar.
3.
Thread the cable into the backshift shaft at the side of gear box and make sure the cable head is
in the big hole of shaft.
4.
Properly counterclockwise rotate the backshift fork shaft, thread the cable into the narrow slit of
backshift plugs through the side of the gear box and make sure the cable head is in the big hole
of the plug.
5.
Rotate out the screw rod and holdfast it repeatedly, unlock the backshift bar. When spring force
can reposition the bar, you should fasten the nuts.
Throttle cable adjustment (
Picture given below)
