KisanKraft
®
AGRICULTURAL INTER-CULTIVATOR
KK-IC-410P
This warranty is null & void, if you fail to register the warranty with KisanKraft
by sending the KisanKraft Copy with dealer’s stamp
. KisanKraft Limited
: +91.80. 6835 7800
Page 26 of 52
Debugging method of throttle cable
When revolving the throttle switch and finding accelerating and decelerating function of the
diesel engine is not good, you should debug the throttle cable. As for the method, please refer
to chapter3.
Attention
:
1. Revolve the throttle switches for twice or three times and check the accelerating and
decelerating function of diesel engine.
2. The throttle cable and connection head should be fastened with screws.
Debugging method of handlebar
Four directions of handlebar can be properly set according to one’s height and cultivator
Operation requirement. The method is in the following (picture)
1.
Up-and-down debugging of handle bar
i.
Unlock the handlebar elements,
disengage the terminal fangs between the
handlebar and handle frame
ii.
Set the position of handle bar according
to one’s height and habits.
iii.
Revolve the handlebar to let terminal
fangs meet between the handlebar and
handle frame.
2.
Left-and-right debugging
i.
Unlock the nut on the handle frame. This
is to unlock the terminal fangs.
ii.
Set handlebar to the proper position on
the left or right.
iii.
Tighten the nut to let terminal fangs meet
