KisanKraft
®
AGRICULTURAL INTER-CULTIVATOR
KK-IC-410P
This warranty is null & void, if you fail to register the warranty with KisanKraft
by sending the KisanKraft Copy with dealer’s stamp
. KisanKraft Limited
: +91.80. 6835 7800
Page 25 of 52
Debugging method of backshift gear and cable
When reverse of Inter-Cultivator is abnormal, you should debug the backshift handlebar and
cable. As for the method, please refer to chapter3.
Attention
:
1. Hold, unlock backshift handlebar twice to three times, which is to put into gear. If the gear is
not properly adjusted, please debug it until it is well done.
2. When driving the Inter-Cultivator, please unlock backshift handlebar. After finishing this,
backshift gear should return to its original position immediately, and there should not be
abnormal collision noise in the gear box, otherwise, gear will be destroyed.
Debugging method of clutch cable
Due to friction plate abrasion, clutch fork abrasion, function of the clutch become poor after a
period of use. Therefore, you should debug the clutch cable. As for the debugging method,
please refer to chapter3.
Attention
:
1. Hold, unlock the clutch handlebar for twice to three times. This is to check working
condition of clutch. If it is abnormal, you should debug the clutch.
2. If it is debugged for several times, and is still in bad condition, it is certain that clutch fork or
friction plate is fretted severely. Therefore, you should change the friction plate or clutch
fork with new parts in the special maintenance station. Never move clutch randomly in case
of destroying the clutch and other parts.
