KisanKraft
®
PETROL ENGINE - 4 STROKE
: +91.80.
6835 7800
Page 27 of 32
Before storing the unit for an extended period:
1.
Make sure the storage area is free of excessive humidity and dust.
2.
Service according to the table below.
Storage Time
Recommended Service Procedure To Prevent Hard Starting
Less than 1 month
No preparation required
1 to 2 months
Fill with fresh gasoline and add gasoline conditioner
2 months to 1 year
•
Fill with fresh gasoline and add gasoline conditioner
•
Drain the carburetor float bowl
•
Drain the fuel sediment cup
STORAGE
If the engine is not used for a long time, do the necessary maintenance before its storage.
•
Firstly, take off the fuel tank, drain out all fuel, and clean the dirt and water
inside the tank. Open the fuel cock, unscrew the drain plug at the bottom of
carburetor, drain out fuel in carburetor thoroughly, and then tighten the drain
plug.
•
Secondly, unscrew the drain plug at the bottom of the crankcase and drain out
the lubricant oil in the crankcase thoroughly, then tighten the drain plug.
•
Finally, clean the surface of the engine with clean cloth, remove the dirt and
dust etc. Then store the engine in a well-ventilated, dirt-free place.
TRANSPORTATION
•
Contact with the hot engine or exhaust system can cause serious burns or fires.
Allow the engine to cool down before transporting or storing the engine.
•
During transport of the engine, turn the engine switch and the fuel valve to OFF.
Keep the engine cool.
