KisanKraft
®
INTERCULTIVATOR
KK-IC-320P
: +91.80.
6835 7800
Page 13 of 32
4. Operation
4.1 Starting Inter-cultivator : Clutch bar should be disengaged, and all gear shifting
levers should be in neutral gear position, and then start the engine following the
usual manual.
4.2 Running: Put gear shifting handle in the required gear position, clench the clutch
handlebar to make the Inter-cultivator work/walk.
4.3 Parking:
a) Loosen Clutch handlebar.
b) Put Gear shifting lever to Neutral position.
c) Following the user manual, if need to turn off the engine.
△
!
Attention
Park the Inter-cultivator
on flatland
5. Operation Attention
5.1 When using mini-Inter-cultivator , you should pay attention to the working
situation and sound of every part, check if the connection is good. There mustn
’t
be loosed connection. If there is abnormal situation, please stop the mini-Inter-
cultivator and check.
5.2 Never carry out work with heavy load if mini-Inter-cultivator has not been used
for a long time, especially the new ones or the repaired ones.
5.3 Pay attention to the oil level of gasoline engine, walking case and gear box.
When they are insufficient, please refuel them.
5.4 Never cool the gasoline engine in the way of water-pouring.
5.5 Prevent Mini-Inter-cultivator from falling down when working operation.
5.6 Never install mini-Inter-cultivator with rotary blades when walking on sand or
stone to avoid damaging blades.
5.7 After working, please clear away dirtiness on the mini-Inter-cultivator , such as
mud, grass and oil stain. Keep the Inter-cultivator clean.
MAINTENANCE
Due to rotary situation, abrasion and load change of mini-Inter-cultivator , bolts will
become loose, and parts will be worn during the work. These changes will destroy the
proper working state of mini-Inter-cultivator , create abnormal fitting clearance, degrade
output of gasoline engine, increase oil consumption, lead to the maladjustment of spare
parts, increase malfunction of mini-Inter-cultivator . All these will seriously affect the
working efficiency of mini-Inter-cultivator . To decrease the frequency of the above-
mentioned accidents, prevention of maintenance work must be done strictly and regularly
to keep the mini-Inter-cultivator in a good technical state and prolong its life.
1. Running-in of mini-Inter-cultivator
1.1 As for running-in of gasoline engine, please refer to its instruction.
1.2 If Mini-Inter-cultivator is new or is just heavily repaired, it should work without load
for one hour. After the mini-Inter-cultivator works with light load for five hours, all
oil in gear box and crankcase of gasoline engine should be drained immediately.
