KisanKraft
®
PETROL ENGINE - 4 STROKE
: +91.80.
6835 7800
Page 26 of 32
Everyday Maintenance:
1.
Air cleaner
: A dirty air cleaner will restrict air flow into the carburetor. To prevent
carburetor malfunction, service the air cleaner regularly. Service more frequently
when operating the generator in extremely dusty areas.
•
Check air cleaner core, get rid of fouling, and keep the core clean.
•
Check bolts, fasten the loose ones.
•
Check whether lubricant oil level is within the limits.
2.
Clean the core after 25hrs of engine run
3.
Clean carbon fouling of the spark plug after working up to 50hrs. Check the
clearance, and adjust the gap to 0.6-0.7mm (see figure 4-1). Check radiator, and
clean fouling among radiators.
•
Drain the oil while the engine is warm to assure rapid and complete draining.
•
Remove the drain plug and sealing washer, remove the oil filler cap, and drain
the oil.
•
Reinstall the drain plug and sealing washer. Tighten the plug securely.
•
Refill with the recommended oil and check the oil level.
(1) Dismantle Spark Plug
(2) Adjust Clearance
4.
Clean the fuel tank and filter when working time reaches 100hrs: Remove the fuel
cover, drop out filter, and wash it with brush slightly. Remove fuel tank, clean the
fouling and water inside fuel tank. Reinstall fuel tank, place filter from fill-in hole,
filling the clean fuel to red line level.
1)
Drain plug
2)
Engine switch
3)
Lower level
Check aging of fuel pipe every 2 years. If ageing, hardening and cracking is detected,
have it replaced. Tighten the joints, and check leakage.
