manualshive.com logo in svg

KISANKRAFT KK-CSP-5920, Operation Manual, Page: 7 / 80

Share
Download
KISANKRAFT KK-CSP-5920 Operation Manual Download Page 7

 

Chainsaw-Petrol 

KK-CSP-5920/6020/6522/7524

 

 

: www.kisankraft.com 

: [email protected] 

: +91.80. 22178200 

 

Page 7 of 80 

BEFORE GETTING STARTED 

We wish to thank you for choosing our product. We are confident that the high quality of our 

product will meet your  requirement and will give you long-lasting service. In order to avoid 

accidents or injury, please read this manual carefully before using the machine. After reading, 

preserve this manual for further reference. 

SAFETY SYMBOLS 

Key to Symbols 

 

WARNING! Chain saws can be dangerous! Careless or improper use can 

result in serious or fatal injury to the operator or others.

 

 

Please read the operator’s manual carefully and make sure you 

understand the instructions before using the machine

 

 

Always wear:

 

• 

Approved protective helmet

 

• 

Approved hearing protection

 

• 

Protective goggles or a visor

 

 

Both of the operator’s hands must be used to operate the chainsaw.

 

 

Never operate a chain saw holding it with one hand only

 

 

Contact with the guide bar tip with any object must be avoided

 

 

Tip contact may cause the guide bar to move suddenly upward and 

backward (so called kickback), which may cause serious injury.

 

Summary of Contents for KK-CSP-5920

















































































Reviews:

No comments