Chainsaw-Petrol
KK-CSP-5920/6020/6522/7524
: www.kisankraft.com
: +91.80. 22178200
Page 27 of 80
Cold Engine
Ignition Switch:
Slide the ignition switch to the (A) position
Choke:
Hold the throttle trigger and throttle control together, then
press down the choke control (B) to set the choke control (B) in the
choke position.
Decompression Valve:
If the machine is fitted with a decompression
valve (C): Press the valve to reduce the pressure in the cylinder and
make starting easier. You should always use the decompression
valve when starting the machine. Once the machine has started, the
valve will automatically return to its original setting. (If the machine is
fitted with an automatic valve, or without a decompression valve,
please disregard this step.
Starting:
Pull the starter handle until the engine is started.
Warm Engine
Pull up the choke control all the way (half choke position), Hold the
throttle trigger and throttle control together, the choke control will
automatically jump back (If it does not jump back, pull it back manually).
Grip the front handle with your left hand. Hold the chain saw on the
ground by placing your right foot through the rear handle. Pull the starter
handle with your right hand and pull out the starter cord slowly until you
feel a resistance (as the starter pawls engage) then pull firmly and
rapidly. Never twist the starter cord around your hand. The user can
remove the reed on the right of the choke control himself, which will make
the choke returns automatically like conventional models, no need to set
the choke control to half choke position.
CAUTION!
Do not pull the starter cord all the way out and do not let go
of the starter handle when the cord is fully extended. This can cause
damage to the machine.
Note!
Pull the front hand guard towards the front handle. The chain brake is
now disengaged. Your saw is ready for use.
WARNING!
Long term inhalation of the engine exhaust fumes, chain
oil mist and dust from sawdust can represent a health risk.