KisanKraft
TM
BATTERY SPRAYER
KK-BBS-212/218/315/318
: www.kisankraft.com
: +91.80. 22178200
Page 19 of 32
Don’t allow the remaining chemical liquids and the water used for washing
the machine flow into rivers, lakes, ponds or cloacae in order avoid
pollution.Please deal with it innoxiously
b) Maintenance of the battery:
In the course of operation, one should understand the frequency and duration of charge
according to the actual condition and referring to usual spr
ay frequency and time. It’s
better to charge when the battery discharged to 60%--70%, the average charging time is
about 8 hours. Longer charging time may cause the battery to lose water, hot and reduce
the life.
Never stock the battery without power. If it happens so and you
couldn’t recharge the
battery on time, it will easily get vitriolized to lead sulphate crystal
，
which jams the path
of the electrical ions, and make the power insufficient. Also the capacity of the battery will
get reduced. If the battery is without power for a long time, serious damage will be
caused. Therefore, even if you are not using the battery for a short period, should charge
it once in a month, so as to keep the battery in a good situation.
It is normal that the charger is little hot while charging.
Overcharge or over discharge will reduce the life of the battery
remarkably.
Don’t connect the battery directly, or it will harm the safe
ty of the
battery.
Never try to disassemble and assemble the battery. The battery has the protection
equipment and if you alter it, it will make the battery hot and split.
Don’t connect the anode and cathode of the battery with
any metallic material.
Don’t transport battery with
a metallic material, which will make the battery leak, hot and
split.
The light on the charger will turn on if you recharge immediately after charging is over, it
becomes normal. But this will result in overcharge and you should avoid the operation.
Don’t throw
the battery into the fire or heat it up, or it will make the battery split and
electrolyte splashed.
c) Replace the fuse:
In order to protect the wire and electrical machine, this machine is equipped with a fuse. If
a blowout happens due to any reason, please unplug the right and left fixed equipment,
take out the assembly of battery, lax the packing belt, remove the battery, open the cap of
fuse to replace the damaged fuse with a new one. In addition, please find out the cause of
the blowout and find a remedy for it. After this, you could operate it once again.
Some causes of blowout:
The charger doesn’t coincide with the battery or has
any other trouble.
The pesticide got stuck to the liquid pump.
The wire is short circuited due to the damage.
Incorrect connection.
