Kisae SWXFR1210 Owner'S Manual Download Page 16

 

 

 

 

Page 16

 

  Relative Humidity 

5-90% noncondensing 

  Operating Altitude 

Up to 9,843ft (3000m) above sea level 

Weights and Dimensions 

 

  Weights 

SWXFR 1210: 5 kg 

SWXFR 1220: 5.9 kg 

SWXFR 1230: 7.0kg 

SWXFR 1210i -EU, -UK, -AU: 5 kg 

SWXFR 1220i –EU, -UK, -AU: 5.9 kg 

  Dimensions 

43.5x23x11.5 cm 

53.9 x 

23 x 

11.5 cm

43.5x23x11.5 cm 

 
 

8. WARRANTY 

One Year Limited Warranty 

The limited warranty program is the only one that applies to this unit, and it sets forth all the 
responsibilities of KISAE Technology. There is no other warranty, other than those described herein. 
Any implied warranty of merchantability of fitness for a particular purpose on this unit is limited in 
duration to the duration of this warranty.  
This unit is warranted, to the original purchaser only, to be free of defects in materials and 
workmanship for one year from the date of purchase without additional charge. The warranty does 
not extend to subsequent purchasers or users. 
Manufacturer will not be responsible for any amount of damage in excess of the retail purchase 
price of the unit under any circumstances. Incidental and consequential damages are specifically 
excluded from coverage under this warranty.  
This unit is not intended for commercial use. This warranty does not apply to damage to units from 
misuse or incorrect installation/connection. Misuse includes wiring or connecting to improper 
polarity power sources.  

 
RETURN/REPAIR POLICY: 

If you are experiencing any problems with your unit, please contact our customer service 
department at [email protected] or Phone 1-877-897-5778 before returning product to 
retail store. After speaking to a customer service representative, if products are deemed non-
working or malfunctioning, the product may be returned to the purchasing store within 30 days of 
original purchase. Any defective unit that is returned to manufacturer within 30 days of the date of 
purchase will be replaced free of charge.  
If such a unit is returned more than 30 days but less than one year from the purchase date, 
manufacturer will repair the unit or, at its option, replace it, free of charge. If the unit is repaired, new 
or reconditioned replacement parts may be used, at manufacturer’s option. A unit may be replaced 
with a new or reconditioned unit of the same or comparable design. The repaired or replaced unit 
will then be warranted under these terms for the remainder of the warranty period. The customer is 
responsible for the shipping charges on all returned items.  

 
LIMITATIONS: 

This warranty does not cover accessories, such as adapters and batteries, damage or defects result 
from normal wear and tear (including chips, scratches, abrasions, discoloration or fading due to 
usage or exposure to sunlight), accidents, damage during shipping to our service facility, alterations, 
unauthorized use or repair, neglect, misuse, abuse, failure to follow instructions for care and 
maintenance, fire and flood. 
If your problem is not covered by his warranty, call our Customer Service Department at                              
[email protected] or 1-877-897-5778 for general information if applicable. 

 

Summary of Contents for SWXFR1210

















Reviews: