4.2 Final decommissioning of the unit
NOTICE!
Wear suitable protective gloves when using the
unit. These gloves must comply with either PPE
Ordinance 2016/424 or the MDD Directive
93/42/EEC (which will be superseded on 27 May
2021 by MDR Regulation 2017/745).
Insert unit key in key switch.
1.
Turn unit key to position “0”.
2.
Unplug power plug.
3.
Remove unit key.
4.
Leave unit door open to prevent the formation of odours and
mould.
4.3 Putting the unit back into operation
NOTICE!
Wear suitable protective gloves when using the
unit. These gloves must comply with either PPE
Ordinance 2016/424 or the MDD Directive
93/42/EEC (which will be superseded on 27 May
2021 by MDR Regulation 2017/745).
Before recommissioning, clean and disinfect the unit
“Cleaning and disinfection” on page 58
1.
Plug in power plug.
2.
Insert unit key in key switch.
3.
Turn unit key to position “1”.
ð
The Display shows the interior temperature.
4.
Check target temperature and adjust if necessary
6.2.1.2 “Displaying and changing the target temperature”
.
Lead time of the temperature alarm!
The temperature alarm is active at the earliest
when the target temperature is reached, and at the
latest after two hours of unit operation.
5.
When the unit has reached its target temperature, place the
chilled goods in the unit.
Final decommissioning of the unit
Putting the unit back into operation
Transport and decommissioning
Putting the unit back into operation
26.05.2021
Refrigerator/freezer BL series
39
