Kirsch 100 03 25C00 Operating Instructions Manual Download Page 28

Page: 28 / 84

3.6 EMC and requirements of the electrical standards

WARNING!
Danger due to failure to comply with require-

ments for electromagnetic compatibility!

Electrical medical equipment is subject to specific

requirements for electromagnetic compatibility

(EMC). Failure to comply with the safety require-

ments leads to a risk of property damage and

injury. In addition, failure of the medical equipment

may result in damage to or destruction of the

chilled goods.

Make sure that electrical medical equipment is

installed and commissioned in accordance with the

following information:

– It is prohibited to use any accessories other

than those described and sold by the manufac-

turer. Spare parts that are not genuine Kirsch

spare parts may increase electromagnetic

emitted interference or reduce the electromag-

netic immunity of the unit.

– Portable and mobile HF equipment (e.g. mobile

phones) can have an impact on electrical med-

ical equipment. The recommended safety dis-

tances must be maintained.

– The unit must not be set up next to, above or

below another unit. If this is unavoidable, check

the unit before use under operating conditions

to verify that it functions correctly.

NOTICE!

This unit is not a life-saving or life-sustaining unit.

Requirements for electromagnetic

compatibility (EMC)

Safety

EMC and requirements of the electrical standards

26.05.2021

Refrigerator/freezer BL series

Summary of Contents for 100 03 25C00





















































































Search results

Summary of Contents for 100 03 25C00

Reviews:

Related manuals for 100 03 25C00

Brands by name

Popular brands

Kirsch 100 03 25C00, Operating Instructions Manual

Search results

Summary of Contents for 100 03 25C00

Reviews:

Related manuals for 100 03 25C00

Brands by name

Popular brands