KIRLOSKAR KPDS, Instruction On Installation, Operation And Maintenance

Page: 29 / 50

IOM/KPDS/NOV 19/00
Page 26 26 26 26 of 50 50 50 50
Issue Date : 22/11/2019
Revision: 00
KPDS 20/13, 16, 20QF, 25/16QF, 32/13-
20, 40/13-20, 50/13-20, 65/13
180D x 130D x 1T
KPDS 32/26, 40/26-32, 50/26-32, 65/16-
32, 80/16-40, 100/20-40, 125/26-45,
150/32 171D x 270D x 1T
51200 Gasket for adapter plate.
KPDS 20/13, 16, 20QF, 25/16QF, 32/13-
20, 40/13-20, 50/13-20, 65/13 51D x 128D x 1T
KPDS 32/26, 40/26-32, 50/26-32, 65/16-
32, 80/16-40, 100/20-40, 125/26-45,
150/32 75D x 170D x 1T
50001 Oil seal (DE).
KPDS 20/13, 16, 20QF, 32/13-20, 40/13-
20, 50/13-20, 65/13 40D x 55D x 7T
KPDS 25/16QF, 32/16-20QF, 40/16-20
QF, 50/16-20QF, 32/26, 40/26, 50/26,
65/16-32, 80/16-40, 100/20-40, 125/26-
45, 150/32 55D x 80D x 13T
KPDS 40/32, 50/32, 40/32QF, 50/32QF 50D x 68D x 10T
50002 Oil seal (NDE).
KPDS 20/13, 16, 20QF, 32/13-20, 40/13-
20, 50/13-20, 65/13 30D x 42D x 7T
KPDS 25/16QF, 32/16-20QF, 40/16-20
QF, 50/16-20QF, 32/26, 40/26, 50/26,
65/16-32, 80/16-40, 100/20-40, 125/26-
45, 150/32 45D x 65D x 12T
KPDS 40/32, 50/32, 40/32QF, 50/32QF 60D x 80D x 12T
13.8 If transmission bearing lubrication is EXTERNAL clear water or compatible liquid, the
pressure and quantity required to be calculated as given under.
Pressure = 1/30 x (Total head in meters) x sp.gr. + 1.0 kg.
Quantity = 0.2 m^3/hr x (N+1)
Where N = No of bearing spiders.
13.9
Mechanical seal disassembly procedure for EBIPL make seal. Refer Fig. A.

Decouple the coupling; keep motor side coupling on motor shaft. Do not remove
motor from motor stool.
 Remove the motor stool (29000) along with motor from support plate (46700).
 Remove pump half coupling from pump shaft.
 Remove the socket head cap screw (943.14). Then rotate the locking strip and
keep in a position as shown in drawing so that it will get fitted in a groove provided
on mating ring-composite (301.00). Again, tight the socket head cap screw so that
operating length will be maintained. (Refer Fig. 1-EBIPL mechanical seal drawing).

Unscrew the grub screw of mechanical seal (944.17) so that seal becomes free for
movement on shaft. (Refer Fig. 1-EBIPL mechanical seal drawing).

Remove hex. lock nut (33600), bearing lock nut (33500) from pump shaft.

Remove the bearing cover (27000) and then remove spacer. Then remove key for
thrust bearing carrier (32400).